Wheel load scale for MiniZ
2 participants
Page 1 sur 1
Wheel load scale for MiniZ
hello
here i want to show you my new project, hope you like it. its not finished yet but i am still wainting for some displays to arive.
It is a wheel load scale based on arduino, and some cheap gold scales.
Hope you like it
Here you can se the wheight of my mini z on a commecrial scale to compare.
The wheight is 137.4 gram
Here the cheap gold scales
Removed the sensors
Added the amplifier/ADC
Need 4 sensors right?
Adding the Arduino
Oh i need a car
And the output on a pc, later on it will be on small displays
As you can see it is pretty accurate
let me know what you think
Regards
here i want to show you my new project, hope you like it. its not finished yet but i am still wainting for some displays to arive.
It is a wheel load scale based on arduino, and some cheap gold scales.
Hope you like it
Here you can se the wheight of my mini z on a commecrial scale to compare.
The wheight is 137.4 gram
Here the cheap gold scales
Removed the sensors
Added the amplifier/ADC
Need 4 sensors right?
Adding the Arduino
Oh i need a car
And the output on a pc, later on it will be on small displays
As you can see it is pretty accurate
let me know what you think
Regards
hhugee- Pilote d'auto-tamponneuse
- Messages : 17
Date d'inscription : 13/01/2016
Re: Wheel load scale for MiniZ
Bonjour à nouveau
bravo pour votre projet, en fait, si je ne me trompe pas,ça ressemble a ceci :
est-ce que les fonctions sont les mêmes, ou ceux de votre projet sont différentes?
Hallo nochmal
bravo für Ihr Projekt, in der Tat, wenn ich mich nicht irre, sieht das so aus:
ist, dass die Funktionen sind die gleichen, oder Ihr Projekt anders? :
bravo pour votre projet, en fait, si je ne me trompe pas,ça ressemble a ceci :
est-ce que les fonctions sont les mêmes, ou ceux de votre projet sont différentes?
Hallo nochmal
bravo für Ihr Projekt, in der Tat, wenn ich mich nicht irre, sieht das so aus:
ist, dass die Funktionen sind die gleichen, oder Ihr Projekt anders? :
patmon91- Pilote de Mini-z
-
Messages : 9429
Date d'inscription : 09/01/2012
Age : 70
Localisation : 91150 - ESSONNE
Re: Wheel load scale for MiniZ
hello,
in fact the funktions will be similar, but the device will be much smaller than the G-Force, and the best of all, no cable will be visible.
My project ist desgined for MiniZ (and small cars only).
I will be using 4 oled displays, instead of 14 7-segment displays like G-Force does.
Regards
in fact the funktions will be similar, but the device will be much smaller than the G-Force, and the best of all, no cable will be visible.
My project ist desgined for MiniZ (and small cars only).
I will be using 4 oled displays, instead of 14 7-segment displays like G-Force does.
Regards
hhugee- Pilote d'auto-tamponneuse
- Messages : 17
Date d'inscription : 13/01/2016
Re: Wheel load scale for MiniZ
Hallo,
die Funktionen sind ähnlich, aber die Waage von G-Force ist viel zu gross für Mini-Z und die Kabel sind immer sichtbar.
Ich werde 4 oled displays benutzen anstatt 14 7-segment Anzeigen.
Gruss
die Funktionen sind ähnlich, aber die Waage von G-Force ist viel zu gross für Mini-Z und die Kabel sind immer sichtbar.
Ich werde 4 oled displays benutzen anstatt 14 7-segment Anzeigen.
Gruss
hhugee- Pilote d'auto-tamponneuse
- Messages : 17
Date d'inscription : 13/01/2016
Re: Wheel load scale for MiniZ
Re
ok nach Erklärungen, so hasse, um Ihren Erfolg zu sehen vorbei.
re
ok pour les explications , donc hate de voir ta réalisation terminée .
ok nach Erklärungen, so hasse, um Ihren Erfolg zu sehen vorbei.
re
ok pour les explications , donc hate de voir ta réalisation terminée .
patmon91- Pilote de Mini-z
-
Messages : 9429
Date d'inscription : 09/01/2012
Age : 70
Localisation : 91150 - ESSONNE
Re: Wheel load scale for MiniZ
Little update, got the displays they are working fine.
now i am making the case, but have not a lot of time.
Regards
now i am making the case, but have not a lot of time.
Regards
hhugee- Pilote d'auto-tamponneuse
- Messages : 17
Date d'inscription : 13/01/2016
Re: Wheel load scale for MiniZ
Good evening,
I see it taking shape, but still a little son to pack! lolllllll
bonsoir ,
je vois que cela prend forme , mais encore un peu de fils à ranger ! lolllllll
I see it taking shape, but still a little son to pack! lolllllll
bonsoir ,
je vois que cela prend forme , mais encore un peu de fils à ranger ! lolllllll
patmon91- Pilote de Mini-z
-
Messages : 9429
Date d'inscription : 09/01/2012
Age : 70
Localisation : 91150 - ESSONNE
Re: Wheel load scale for MiniZ
A little update,
now i have to write the code, and later on i will make a nice case.
hope you like it
Regards
now i have to write the code, and later on i will make a nice case.
hope you like it
Regards
hhugee- Pilote d'auto-tamponneuse
- Messages : 17
Date d'inscription : 13/01/2016
Sujets similaires
» vente miniz : 2xVE, Pièces option, Autoscales Miniz et Dnano
» Mini Z Scale 4X4
» Scale, Crawler 1/10
» Auto Scale pour mr-03 mm 98 mm
» Carrosserie auto scale et Atomic AMZ 4wd
» Mini Z Scale 4X4
» Scale, Crawler 1/10
» Auto Scale pour mr-03 mm 98 mm
» Carrosserie auto scale et Atomic AMZ 4wd
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|
Aujourd'hui à 19:55 par feydartic
» Bonjour de lyon
Aujourd'hui à 19:48 par thib
» Finale du TDAS 04-05 MAI
Mer 24 Avr 2024 - 11:38 par cyro
» Z SERIES DE L'ATLANTIQUE dernière manche les 18 et 19 mai 2024 à Thouars (79)
Mar 23 Avr 2024 - 16:09 par Lessart Arthur
» RTRC ENDURANCE 2024 - MCP (44)
Lun 22 Avr 2024 - 17:36 par tytom
» Z SERIES ATLANTIQUE - LMC Maillé (86) - 27 et 28 avril 2024
Sam 20 Avr 2024 - 18:01 par yann86
» Recherche Variateur ESC Gl Racing GSC V1.2
Mer 17 Avr 2024 - 10:26 par feydartic
» MARKA 1/28 EURO CUP 2024
Jeu 11 Avr 2024 - 19:45 par fino
» Bonjour de Bretagne
Lun 1 Avr 2024 - 8:51 par glegleg